3-12×50 LP Riflescope with P3 Reticle Combines parallax compensation illuminated reticle control and 1/4 MOA clicks in a highly ergonomic design with controls clearly separated for safe quick handling in high-stress situations. Unique to the PM II/LP is a color-coded elevation knob that gives the shooter instant reference to where the elevation is set. Just one turn of the knob provides 28 minutes of elevation. A window within the dial then changes to yellow and one additional turn provides an additional 28 minutes of adjustment. Thus the complete 56-minute adjustment range can be covered in only two turns of the elevation knob while the dials window graphically shows the shooter where they are within the overall range. This solves the problem posed by many tactical scopes when the shooter can become lost within an adjustment range requiring several turns of the elevation knob especially under stressful conditions.Parallax adjustment is located in its own separate turret as are the illuminated reticle controls. The reticle brightness is fully adjustable with 11 graduated settings allowing precise selection relative to ambient light. There is a convenient standby position between the settings that switches off the illumination while allowing the shooter to quickly return to the pre-selected brightness level. The full magnification range of the scope can be covered with only one-half turn (180 degrees) of the adjustment ring. The P-3 reticle is standard.Schmidt & Bender P3 ReticleThe P-3 Mil-dot Reticle was developed by the U.S. Marine Corps in the late 1970s as an aid for the Marine sniper in estimating distances. It has since become the military standard for range estimating within all branches of the service.The name mil-dot comes from the term millradian and the dot that is spaced in 1 mil increments on the crosshairs. By using the mil formula a table can be generated based upon the size of the object being range-estimated. This table is included with the scope. The object viewed is bracketed between the dots and by consulting the table the distance can be estimated.Note: reticles are enlarged to show detail. A - 4.60 inch B - 1.50 inch C - 1.50 inch D - 1.90 inch E - 1.70 inch F - 2.30 inch G - 4.90 inch H - 1.69 inch I - 2.24 inch J - 13.5 inch K - 34mmWeight - 30 oz.Twilight Factor - 8.5/24.5Eye Relief - 3.70 inchClick Value - 1/4 inch MOAField of View - 33.3/12.6 ft @ 100 yards
View Similar Products in these Categories: riflescope, scope, Scopes
4-16×50 Parallax Riflescope with P1 ReticleFor extreme precision at longer ranges. Parallax adjustment included. P1 or P3 reticle.Schmidt & Bender P1 Reticle The P-1 Reticle was developed for Schmidt & Bender by Deputy Sheriff Robert Bryant who has many years of experience as a SWAT team member and advisor to police departments. You will find the Bryant design very user-friendly and exceptionally efficient in high stress situations.The horizontal lines under the crosshair make it possible to estimate distances up to 500 yards by cradling an 18 inch object between them. The posts lines and the circle are all proportioned to help in rangefinding and in making allowances for wind or movement. Complete details are included with the scope.Note: reticles are enlarged to show detail. A - 3.50 inch B - 2.50 inch C - 1.50 inch D - 1.60 inch E - 3.30 inch F - 2.90 inch G - 5.60 inch H - 1.69 inch I - 2.24 inch J - 15.5 inch K - 34mmWeight - 32 oz.Twilight Factor - 11.3/28.3Eye Relief - 3.70 inchClick Value - 1/4 inch MOAField of View - 22.5/7.5 ft @ 100 yards
View Similar Products in these Categories: riflescope, Schmidt & Bender, scope, Scopes
4-16×50 Parallax Riflescope with P3 ReticleFor extreme precision at longer ranges. Parallax adjustment included. P1 or P3 reticle.Schmidt & Bender P3 Reticle The P-3 Mil-dot Reticle was developed by the U.S. Marine Corps in the late 1970s as an aid for the Marine sniper in estimating distances. It has since become the military standard for range estimating within all branches of the service.The name mil-dot comes from the term millradian and the dot that is spaced in 1 mil increments on the crosshairs. By using the mil formula a table can be generated based upon the size of the object being range-estimated. This table is included with the scope. The object viewed is bracketed between the dots and by consulting the table the distance can be estimated.Note: reticles are enlarged to show detail. A - 3.50 inch B - 2.50 inch C - 1.50 inch D - 1.60 inch E - 3.30 inch F - 2.90 inch G - 5.60 inch H - 1.69 inch I - 2.24 inch J - 15.5 inch K - 34mmWeight - 32 oz.Twilight Factor - 11.3/28.3Eye Relief - 3.70 inchClick Value - 1/4 inch MOAField of View - 22.5/7.5 ft @ 100 yards
View Similar Products in these Categories: riflescope, scope, Scopes
3-12×50 Parallax Riflescope with P1 Reticle Highly versatile adaptable to almost any situation you will encounter with a wide magnification range. The 50mm objective lens gives outstanding performance in poor light. Available in three configurations: standard illuminated reticle and with parallax adjustment.Schmidt & Bender P1 Reticle The P-1 Reticle was developed for Schmidt & Bender by Deputy Sheriff Robert Bryant who has many years of experience as a SWAT team member and advisor to police departments. You will find the Bryant design very user-friendly and exceptionally efficient in high stress situations.The horizontal lines under the crosshair make it possible to estimate distances up to 500 yards by cradling an 18 inch object between them. The posts lines and the circle are all proportioned to help in rangefinding and in making allowances for wind or movement. Complete details are included with the scope.Note: reticles are enlarged to show detail. A - 3.50 inch B - 2.50 inch C - 1.50 inch D - 1.70 inch E - 1.70 inch F - 2.50 inch G - 5.70 inch H - 1.69 inch I - 2.24 inch J - 13.5 inch K - 34mmWeight - 29 oz.Twilight Factor - 8.5/24.5Eye Relief - 3.70 inchClick Value - 1/4 inch MOAField of View - 33.3/12.6 ft @ 100 yards
View Similar Products in these Categories: riflescope, scope, Scopes
3-12×50 Parallax Riflescope with P3 Reticle Highly versatile adaptable to almost any situation you will encounter with a wide magnification range. The 50mm objective lens gives outstanding performance in poor light. Available in three configurations: standard illuminated reticle and with parallax adjustment.Schmidt & Bender P3 Reticle The P-3 Mil-dot Reticle was developed by the U.S. Marine Corps in the late 1970s as an aid for the Marine sniper in estimating distances. It has since become the military standard for range estimating within all branches of the service.The name mil-dot comes from the term millradian and the dot that is spaced in 1 mil increments on the crosshairs. By using the mil formula a table can be generated based upon the size of the object being range-estimated. This table is included with the scope. The object viewed is bracketed between the dots and by consulting the table the distance can be estimated.Note: reticles are enlarged to show detail. A - 3.50 inch B - 2.50 inch C - 1.50 inch D - 1.70 inch E - 1.70 inch F - 2.50 inch G - 5.70 inch H - 1.69 inch I - 2.24 inch J - 13.5 inch K - 34mmWeight - 29 oz.Twilight Factor - 8.5/24.5Eye Relief - 3.70 inchClick Value - 1/4 inch MOAField of View - 33.3/12.6 ft @ 100 yards
View Similar Products in these Categories: riflescope, scope, Scopes